EPAK2500R - The Rack Mounted ES Solution
Rack mount version of our popular EPAK2500 four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. Two shock mounted fans move air across the heatsinks which seal and protect the electronic components. This minimizes maintenance cycles and improves the components lifespan and reliability. Both the EPAK2500 and EPAK2500R utilize KV2’s industry leading 20MHz sampling for on board time alignment and phase correction of all components in the ES system.
High Frequency Amplifier Specification
| Type |
Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
| Rated Continuous Power |
100W |
| Distortion |
<0.05% |
| Operating Bandwidth |
2.5kHz to 28kHz |
Mid Frequency Amplifier Specification
| Type |
Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
| Rated Continuous Power |
200W |
| Distortion |
<0.05% |
| Operating Bandwidth |
500Hz to 2.5kHz |
Mid Bass Frequency Amplifier Specification
| Type |
High efficiency, Low frequency, Current-enhancing switch mode |
| Rated Continuous Power |
600W |
| Distortion |
<0.05% |
| Operating Bandwidth |
130Hz to 500Hz |
Low Frequency Amplifier Specification
| Type |
High efficiency, Low frequency, Current-enhancing switch mode |
| Rated Continuous Power |
1600W |
| Distortion |
<0.05% |
| Operating Bandwidth |
20Hz to 130Hz |
Signal Input
| Input Sensitivity |
1.0V RMS |
| Input Impedance |
20kΩ (balanced) or 50Ω "Line Driver ready" |
Speaker Output
| Speaker Output |
AP6 (Mid-Hi), AP4 (Sub) |
Power Requirements
| Power Connector |
Neutrik PowerCon® |
| Operating Voltage Range |
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage |
20A 115V | 10A 230V | 10A 250V |
Physical Dimensions
| Height |
177 mm (6.96") |
| Width |
481.4 mm (18.95") |
| Depth |
415.4 mm (16.35") |
| Weight |
30 kg (66lbs) |
