VHD3200 - Subwoofer Amplifier
Power for the VHD subwoofers is provided by the VHD3200 rack mounted subwoofer amplifier. The unit contains two separate 1600W amplifiers with individual power supplies, signal paths and I/O within a single four rack space chassis. The unit acts as a slave for the VHD2000, which provides audio and control signal, and also functions in the same way for expansion of an ES series system, taking its feed from the external subwoofer output on an EPAK2500R or an ESR/SL3000 amplifier. The 3200 amplifier can also run in bridge mode for maximum bass output driving a single VHD2.21 sub.
Output Channels
| Number of Channels |
2 |
| Out. Power 4Ω - 1 channel / 2 channels loaded |
1600W / 1600W (RMS) |
| Out. Power 8Ω - bridged |
3200W (RMS) |
Low Frequency Amplifier Specification
| Type |
High efficiency, Low frequency, Current-enhancing switch mode |
| Distortion |
<0.05% |
| Operating Bandwidth |
20Hz to 100Hz |
Signal Input
| Input Sensitivity |
1.0V RMS |
| Input Impedance |
20kΩ (balanced) |
| Signal Output |
Main Through OUT |
Speaker Output
| Speaker Output |
2x AP4 (1x AP4 bridge) |
Features
| System setup |
Limiter / Short protection |
Power Requirements
| Power Connector |
2x Neutrik PowerCon® |
| Operating Voltage |
115V / 230V / 250V |
| Operating Voltage Range |
100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage |
2 x 20A 115V | 2 x 10A 230V| 2 x 10A 250V |
| Soft Start |
YES |
| Protection |
Thermal breaker |
| Cooling |
2x temperature controlled fans |
Physical Dimensions
| Height |
177.4 mm (7.0") |
| Width |
481.4 mm (18.9") |
| Depth |
455.3 mm (17.9") |
| Weight |
35 kg (88lbs) |
