🇸🇪 Lab Gruppen FP 10000Q 10kw Pre-Owned


Description




General Features
  • Very high power and channel density The four-channel FP 10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U
  • Four-channel flexibility Four channels in one cabinet increases efficiency, flexibility and value in powering monitor systems, line arrays, and bi- or tri-amped systems. Adjacent channels bridgeable for 2- or 3-channel operation
  • Lab.gruppen sound quality FP 10000Q amplifiers maintain the impeccable sonic performance standards set by the original fP Series, with the same durability and even greater efficiency
  • NomadLink network ready Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink network
  • Patented Class TD amplifier topology Road-proven output stage delivers Class B audio quality with Class D efficiency
  • Regulated Switch Mode Power Supply (R.SMPS) Output power remains constant even with significant drops in the mains voltage
  • Efficient cooling system Unique, lightweight Intercooler copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any system or application
  • XLR input connectors
  • Heavy-duty binding post or Speakon output connectors
  • Comprehensive protection and warning Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
  • 1-year Manufacturer's warranty


General Specifications
  • Number of channels 4
  • Peak total output all channels driven 10000 W
  • Peak output voltage per channel 150 V
  • Max. output current per channel 38 Arms
  • Max Power Output:
  • 16 ohms: 660 watts x 4 chan.
  • 8 ohms: 1600 watts x 4 chan.
  • 4 ohms: 2100 watts x 4 chan.
  • 2 ohms: 2500 watts x 4 chan.
  • Bridged, 16 ohms: 2600 watts x 2 chan.
  • Bridged, 8 ohms: 4200 watts x 2 chan.
  • Bridged, 4 ohms: 5000 watts x 2 chan.
  • Performance with Gain: 35 dB and VPL: 150V
  • THD 20 Hz - 20 kHz for 1 W <0.1%
  • THD at 1 kHz and 1 dB below clipping <0.05%
  • Signal To Noise Ratio >112 dBA
  • Channel separation (Crosstalk) at 1 kHz >70 dB
  • Frequency response (1 W into 8 ohms) +0/-3 dB 6.8 Hz - 34 kHz
  • Input impedance 20 kOhm
  • Input Common Mode Rejection, CMR 45 dB
  • Output impedance @ 100 Hz 56 mOhm
  • Output slew rate into 8 ohms 20 V/microsecond
  • Voltage Peak Limiter (VPL), Max. Peak Output
  • VPL, selectable per ch. 150, 121, 101, 83, 70, 56, 47, 38 V
  • VPL, selectable when bridged 1) 300, 242, 202, 166, 140, 112, 94, 76 V
  • Voltage Peak Limiter mode (per ch.) Hard / Soft
  • Gain and Level
  • Amplifier gain selectable (all channels) 1) rear-panel switches: 23, 26, 29, 32, 35, 38, 41, 44 dB
  • Default gain 35 dB
  • Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB
  • Connectors and Switches
  • Input connectors (per ch.): 3-pin XLR, electronically balanced
  • Output connectors (per ch.): Neutrik Speakon or Binding Posts (must be specified upon order)
  • Output bridge mode: A+B, C+D - Ch.s A and C are signal input source
  • NomadLink network: On board, 2 x RJ45 EtherCon connectors, IN and OUT
  • Intelligent fans (on/off): Yes, depending on presence of output signal
  • Power on/off and Remote enable on/off: Individual switches on front-panel
  • Cooling: Two fans, front-to-rear airflow, temperature controlled speed
  • Front-panel indicators:
  • Common NomadLink Network; Power Average Limiter (PAL) 2); Power on
  • Per channel: Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
  • Power
  • Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 V
  • Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
  • Power Average Limiter (PAL) 2) Yes
  • Soft start / Inrush Current Draw Yes / max. 5 A
  • Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
  • Dimensions (W/H/D)
  • W: 483 mm (19), H: 88 mm (2 U), Overall D: 396 mm (15.6), Mounting D: 358 mm (14.1)
  • Weight 12 kg (26.4 lbs.)
  • Finish Black painted steel chassis with black painted steel / aluminum front

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed